From e0f29d5815a7dd4d45733ce1d661f1df263913d4 Mon Sep 17 00:00:00 2001
From: chenlh <2008get@163.com>
Date: 星期四, 09 十月 2025 15:23:10 +0800
Subject: [PATCH] 第一轮测试OK版提交
---
src/main.cpp | 38 ++++++++++++++++++++++----------------
1 files changed, 22 insertions(+), 16 deletions(-)
diff --git a/src/main.cpp b/src/main.cpp
index f4a6f5c..0c943ef 100644
--- a/src/main.cpp
+++ b/src/main.cpp
@@ -67,6 +67,9 @@
}
if(tob == NULL) return ;
+ if (iid == 53)
+ int ii = 0;
+
if(var.TopoLoading){
MuteOutput();
}
@@ -76,9 +79,9 @@
tob->toProc();
UpdateOutput(iid, DMACount[iid]&0x1);
- //LP_transmit();
-// ModulesAsynSetInterval(proc_secs);
-// fir_acc_startup();
+// LP_transmit();
+ ModulesAsynSetInterval(proc_secs);
+ fir_acc_startup();
clock_stop = clock();
proc_secs = ((ufloat) (clock_stop - clock_start))/ CLOCKS_PER_SEC;
}
@@ -87,7 +90,7 @@
UpdateOutput(iid, DMACount[iid]&0x1);
}
- DMACount[iid]++;
+ ++DMACount[iid];
}
int main(int argc, char *argv[])
@@ -119,22 +122,22 @@
memset(DMACount, 0, sizeof(DMACount));
Message* spiMsg = new Message(8);
- //第一次启动上报特别是仿真的时候需要arm'重新发送消息.
- spiMsg->DspStatusPush(DSP_EMULATE_DEBUG, 0, 0);
- spiMsg->ReportDspStatus(&msg);
SPI2_Init();
fir_acc_init();
//通知arm启动完成.
- //dir: pin12, High level DSP can receive data, low level DSP has data to send .
+ //dir: pin12, High level DSP can receive data, low level DSP has data toz send .
//busy: pin13/PB5, low level DSP is in busy state and cannot receive and send data, high level is free.
GPIO_SetOutPut(GPIOA, GPIO_Pin12, GPIO_HIGH);
GPIO_SetOutPut(GPIOB, GPIO_Pin5, GPIO_HIGH);
- u32 ddrspace = sram_free_space(SRAM_DDR, mem_any);
- printf("ddrspace:%d\n", ddrspace);
+ //第一次启动上报特别是仿真的时候需要arm'重新发握手.
+ spiMsg->DspStatusPush(DSP_EMULATE_DEBUG, 0, 0);
+ spiMsg->ReportDspStatus(&msg);
+
+ printf("free sram %d, L2 %d\n", sram_free_space(SRAM_DDR, mem_any), sram_free_space(SRAM_L2, mem_any));
while(1) {
asyn_proc_secs = ModulesAsynProcess();
@@ -170,25 +173,28 @@
//clock state will change after running,it need check always.
//about 1s
- if(++loop_cnt > 100000000){
- if(clock_check_count == DMACount[var.master_intr]) {
+ if(++loop_cnt > 5e+6){
+ if (var.clock_ok && clock_check_count == DMACount[var.master_intr]) {
var.dsp_status = dsp_no_clock;
- spiMsg->DspStatusPush(DSP_CLOCK_STATUS, &var.dsp_status ,1);
+ spiMsg->DspStatusPush(DSP_RUNNING_STATUS, &var.dsp_status ,1);
spiMsg->ReportDspStatus(&msg);
+ printf("clk0 ok\n");
}
loop_cnt =0;
clock_check_count = DMACount[var.master_intr];
- printf("clk1 ok\n");
+// printf("clk1 ok\n");
}
-
if(!var.clock_ok && var.dsp_status == DSPStatus::dsp_running_ok && var.HandShakeSuccesful) {
//notify arm to work normaly.
- spiMsg->DspStatusPush(DSP_CLOCK_STATUS, 0, 0);
+ spiMsg->DspStatusPush(DSP_CLOCK_STATUS, &var.dsp_status, 1);
request_topo_count = DMACount[var.master_intr] ;
var.clock_ok = utrue;
+ spiMsg->ReportDspStatus(&msg);
printf("clk2 ok\n");
}
+
+
}
}
--
Gitblit v1.9.3