首轮测试代码提交

chenlh

2025-09-18 8445c54f01777513912d4c6d36c28e92a0ff33a0

 src/hw_adapter.h

@@ -33,31 +33,40 @@
   s8 usb_output_num;
   s8 dante_input_num ;
   s8 dante_output_num ;
   s8 local_input_num;
   s8 local_output_num;
public:
   virtual ~hw_adapter_t(){}
   hw_adapter_t(s8 dual_dsp,s8 dsp_index,s8 ana_input_num,s8 ana_output_num,s8 dante_input_num,s8 dante_output_num)
   hw_adapter_t(s8 dual_dsp, s8 dsp_index, s8 local_input_num, s8 local_output_num, s8 dante_input_num, s8 dante_output_num)
   {
      this->dual_dsp = dual_dsp;
      this->dsp_index = dsp_index ;
      this->ana_input_num = ana_input_num;
      this->ana_output_num = ana_output_num;
      this->local_input_num = local_input_num;
      this->local_output_num = local_output_num;
      this->dante_input_num = dante_input_num;
      this->dante_output_num = dante_output_num;
      this->usb_input_num = 2;
      this->usb_output_num = 2;
<<<<<<< HEAD
      this->ana_input_num = local_input_num - usb_input_num;
      this->ana_output_num = local_output_num - usb_output_num;
=======
>>>>>>> 0d5b7df96a2ee186b7b085dca9cf9a33f791c430
   }
   uvoid get_channel_num(s8* ana_rx_num,s8* ana_tx_num,s8* dante_rx_num,s8* dante_tx_num)
   uvoid get_channel_num(s8* loc_rx_num,s8* loc_tx_num,s8* dante_rx_num,s8* dante_tx_num,s8* usb_rx_num,s8* usb_tx_num)
   {
      *ana_rx_num = ana_input_num;
      *ana_tx_num = ana_output_num;
      *loc_rx_num = local_input_num;
      *loc_tx_num = local_output_num;
      *dante_rx_num = dante_input_num;
      *dante_tx_num = dante_output_num;
      *usb_rx_num = usb_input_num;
      *usb_tx_num = usb_output_num;
   }

   uvoid get_channel_num(u16* input_num ,u16* output_num)
   {
      *input_num = ana_input_num+dante_input_num;
      *output_num = ana_output_num+dante_output_num;
      *input_num = local_input_num+dante_input_num;
      *output_num = local_output_num+dante_output_num;
   }

   s32 get_dsp_index() {return dsp_index ;}
@@ -66,7 +75,7 @@
   //dai,sport配置顺序就已经决定了物理buffer.
   virtual uvoid config_board(struct DSPConfig * conf) =0;

   //根据逻辑通道号获取物理通道号
   //根据逻辑通道号获取物理通道号，从0开始.
   //逻辑通道号就是输入输出模块通道（端口）索引; 物理通道号是sport配置的buffer.
   virtual s32 get_physical_channel(s32 input , s32 logic_channel) = 0;
};